Manual Description
Remove engine under cover (without off road package) or skid plate (with off road package). Install engine under cover (without off road package) or skid plate (with off road package). Remove the engine under cover (without off road package) or skid plate (with off road package).
G Completely wipe off any engine oil that adheres to the engine and the vehicle. Install the engine under cover (without off road package) or skid plate (with off road package). Check oil cooler for clogging by blowing compressed air through engine coolant inlet.
If replacement is necessary, remove the valve by prying it out using a suitable tool. E Tighten the connector bolt after aligning the protrusion of the oil cooler with the stopper on the oil pan (upper). Measure the outer diameter of protruded portion of inner rotor (position 5) using suitable tool.
Manual Cover
General