Manual Description
Disconnect both the negative and positive battery terminals, then wait at least three minutes. Remove the seat belt retractor and belt assembly lower anchor bolt and upper bolt. Remove bolts from anchor bracket and remove center seat belt retractor and belt assembly.
Seat belt pre-tensioners should be replaced even if the seat belts are not in use during a frontal collision in which the air bags are deployed. Replace any seat belt assembly (including anchor bolts) if: The seat belt was in use at the time of a collision (except for minor collisions and the belts, retractors and buckles show no damage and continue to operate properly). Inspect the seat belt attaching area for damage or distortion and repair as necessary before installing a new seat belt assembly.
Check that the seat belt retractor, seat belt anchor and buckle bolts are securely attached. Check the shoulder seat belt guide and shoulder belt height adjuster for front seats. If the seat belt does not return smoothly, wipe the inside of the loops with a clean paper cloth, because dirt built up in the loops of the upper anchors can cause the seat belts to retract slowly.
Manual Cover
General