Manual Description
When using a circuit tester to measure voltage or resistance of each circuit, be careful not to damage or deform connector terminals. The malfunction location is indicated by the low tire pressure warning lamp flashing and the buzzer sounding. Check low tire pressure warning lamp again for flashing, replace malfunctioning transmitter.
Place wheel and tire assembly on tire changing machine and C break both tire beads. Ensure that the transmitter remains at the bottom of the tire while breaking the bead. Turn tire so that valve hole is at bottom, and gently bounce the tire to ensure transmitter is near valve hole.
Carefully lift tire onto turntable and position valve hole (and transmitter) 270 degrees G from mounting/dismounting head. Apply suitable silicone lubricant to new transmitter seal then install seal on transmitter.
Manual Cover
General