Manual Description
This system includes seat belt switch inputs and dual stage front air bag modules. Engage parking brake lever, then lift up the end of the trim on the lever to access the adjusting nut. Rotate adjusting nut to fully loosen cable, and then release parking brake lever.
Depress the foot brake about 10 times and adjust the rear shoe clearance. Rotate brake drum to make sure that there is no drag. Adjust parking brake cable with the following procedure.
When replace parking brake cable, operate parking brake lever with a force of 490 N (50 kg-f, 110 lb-f) about 10 times. Rotate adjusting nut to adjust parking brake lever stroke using a deep socket wrench. Operate parking brake lever with a force of 196 N (20 kg-f, 44 lb-f), make sure the parking brake lever stroke is within the specified number of notches.
Manual Cover
General