Manual Description
When inner and outer imbalance values are shown on the balancer machine indicator, multiply outer imbalance value by 5/3 (1. Select the outer balance weight with a value closest to the calculated value above and install in to the designated outer position of, or at the designated angle in relation to the road wheel. Push the transmitter activation tool against the tire near the front D left transmitter.
Adjust the tire pressure to the values shown in the table below and drive the vehicle at 15 km/h (9. Push the transmitter activation tool against the tire near the front left transmitter. After completing wake up of all transmitters, make sure low tire pressure warning lamp goes out.
The malfunction location is indicated by the low tire pressure warning lamp flashing and the buzzer sounding. Check low tire pressure warning lamp again for flashing, replace malfunctioning transmitter. Ensure that the transmitter remains at the bottom of the tire while breaking the bead.
Manual Cover
General