Manual Description
If the vacuum level drops, perform any necessary repairs to the system and repeat steps 6 - 8 to bring the vacuum to the specified amount. Place the coolant container (with the refill hose inserted) at the same level as the top of the radiator. Then open the ball valve on the refill hose so the coolant will be drawn up to fill the cooling system.
Fill the cooling system reservoir tank to the specified level and install the radiator cap. Run the engine to C warm up the cooling system and top up the system as necessary. Blow air again into all the radiator core surfaces once per minute until no water sprays out.
Serious burns could occur from high-pressure engine coolant escaping from radiator. Remove radiator core support (upper) bolts, bolts of stationary part on the radiator core support side and clip. Lift radiator assembly (1) from radiator (upper) mount part of radiator core K support (upper) (2).
Manual Cover
General