Manual Description
Turn bulb socket counterclockwise and unlock from the front combination lamp assembly. Pull front combination lamp assembly (1) toward the vehicle front, disconnect connector, and remove assembly. With power and ground supplied, high beam headlamps illuminate at reduced intensity.
Check voltage between daytime light relay 1 harness connector E37 terminals 2, 5 and ground. Apply battery voltage to daytime light relay 1 terminal 2 and supply ground to terminal 1. Set that there is no-load in vehicle other than the driver (or equivalent weight placed in driver's position).
Coolant, engine oil filled up to correct level and full fuel tank, spare tire, jack and tools are properly stowed. Insert the tool through the adjusting screw access hole to avoid damage to the adjusting screw. Turn bulb socket counterclockwise and unlock from front combination lamp assembly.
Manual Cover
General