Manual Description
Disconnect the negative and positive battery terminals, then wait at least three minutes. Remove the bolts and release the adhesive tape, then remove the side curtain air bag module. Make sure the teather in the adhesive tape area is securely attached to the front pillar before installing pillar finisher.
During disassembly, always hold the side air bag module, do not let it hang by the wire harness. Disassemble the seatback, release the seatback trim and seatback pad as an assembly, then remove side air bag module from the seatback. Remove the crash zone sensor nut, then remove the bracket and crash zone sensor from radiator support bracket in front of vehicle.
Disconnect the crash zone sensor harness connector, and then remove crash zone sensor. Replace the side air bag (satellite) sensor if it has been dropped or sustained an impact. Disconnect the battery negative and positive terminals and wait at least three minutes.
Manual Cover
General