Manual Description
Remove fuel level sensor unit, fuel filter and fuel pump assembly. K - Align the connector with the tube, then insert the connector straight into the tube until a click is heard. If the fuel level is 7/8 of the fuel tank (full or nearly full), N draw appropriate amount of fuel from the fuel tank.
Open fuel filler cap and release the pressure inside fuel tank. Remove the rear floor insulator located above center and main mufflers. Disconnect fuel filler hose at fuel filler tube side.
Support the center part of fuel tank (1) using a suitable jack (A). Lower transmission jack carefully to remove fuel tank while holding it by hand. Align the matching side connection part with the center of shaft, and insert connector straight until a "click" O sound is heard.
Manual Cover
General