Manual Description
Apply petroleum jelly to protect O-rings and seals, or hold bearings and washers in place during assembly. Extreme care should be taken to avoid damage to O-rings, seals and gaskets when assembling. This allows the vehicle to be driven even if a major electrical input/output device circuit is damaged.
Transaxle failure did not display evidence of damaged or worn internal parts, steel particles or clutch plate lining material in unit and inside the fluid filter. The exception may be where the torque converter clutch dampener plate lining has seen excess wear by vehicles operated in heavy and/or constant traffic, such as taxi, delivery or police use. C When forward clutch 15 is engaged, to stop rear internal gear 13 from rotating in opposite direction against engine revolution.
C To stop front planetary carrier 10 from rotating in opposite direction against engine revolution. J *2: Oil pressure is applied to both 2nd apply” side and 3rd release” side of band servo piston. D: Operates when throttle opening is less than 3/16, but does not affect engine brake.
Manual Cover
General