Manual Description
In a case that temperature detected by ambient sensor is higher than indicated temperature. In a case that temperature detected by ambient sensor is lower than indicated temperature. Each control unit transmits/receives data but selectively reads required data only.
Meters/gauges can be checked in self-diagnosis mode. While pushing the odo/trip meter switch, turn ignition switch ON again. All the segments on the odo/trip meter illuminate, and simultaneously the low-fuel warning lamp indicator L illuminates.
At this time, the unified meter control unit is turned to diagnosis mode. According to the trouble diagnosis chart, repair or replace the cause of the symptom. NO >> Check ignition power supply circuit of combination meter.
Manual Cover
General