Online Viewer
Manual Description
Fuel cut will be operated until the engine speed reaches 1,500 rpm, then fuel cut will be cancelled. Each control unit transmits/receives data but selectively reads required data only. Make sure that throttle valve moves during above 10 seconds by confirming the operating sound.
H Learning will be cancelled if any of the following conditions are missed for even a moment. Rev up the engine two or three times and make sure that idle speed and ignition timing are within the specifications. It is impossible to switch the diagnostic mode when an accelerator pedal position sensor circuit has a malfunction.
Be careful not to scratch or put debris around connection area when servicing, so that the quick connector maintains sealability with O-rings inside. Prepare fuel hose and fuel hose clamp for fuel pressure check, and connect fuel pressure gauge. To avoid unnecessary force or tension to hose, use moderately long fuel hose for fuel pressure check.
Manual Cover
General