Manual Description
When the frontal collision with an impact exceeding a specified level occurs, seat belt slack resulting from clothing or other factors is immediately taken up by the pre-tensioner. The front seatbacks with built-in type side air bag have the labels shown in figure at right. When replacing the diagnosis sensor unit, refer to the part number for the compatibility.
After repair, make sure the discriminated number of diagnosis sensor unit installed to vehicle are same. Follow the procedure in numerical order when repairing malfunctioning parts, then make the system check. Do not allow oil, grease or water to come in contact with the front passenger air bag module.
A After the work is completed, perform self-diagnosis to check that no malfunction is detected. Remove the spiral cable fixing screws, and while pushing the upper plastic tab, remove the spiral cable. After the work is completed, perform self-diagnosis to check that no malfunction is detected.
Manual Cover
General