Manual Description
Repeat steps 5 through 7 two or more times with radiator cap installed until coolant no longer drops. If sound is heard, bleed air from cooling system by repeating steps 5 through 7 until coolant level no longer drops. Fill radiator with water until water spills from the air relief hole, then close air relief plug.
After engine stalls, crank engine two or three times to make sure that fuel pressure is released. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible. Screw in the oil filter until a slight resistance is felt, then tighten additionally more than 2/3 of a turn.
Inspect drive belt deflection or tension at a point on the belt midway between pulleys. Set air conditioning system as follows to prevent coolant from remaining in the system. Open radiator drain plug at the bottom of radiator and remove radiator filler cap.
Manual Cover
General