Manual Description
J With power and ground supplied, the high beams and the high beam indicator illuminate. Remove headlamp bulb from the headlamp reflector just before a replacement bulb is installed. Basic illuminating area (shaded) for adjustment should be within the range shown on the aiming chart.
If the parking brake is applied before the engine is started the daytime lights will not be illuminated. Thereafter, the daytime lights will continue to operate when the parking brake is applied. If the daytime light control unit receives a ground signal from the generator, the daytime lights will not be illuminated.
The daytime lights will illuminate once a battery positive voltage signal is sent to the daytime light control unit from the generator. With power and ground supplied, the high beam headlamps and high beam indicator illuminate. F Because the high beam headlamps are now wired in series, they operate at half illumination.
Manual Cover
General