Manual Description
For intermittent malfunctions, reproduce symptoms based on interview with customer and past examples. In this case, it will be effective to shake suspected harness or connector by hand. Except for "0": Error detected in the past and memorized with transfer control unit.
Switch" Motor does not operate properly due to open or short circuit in actuator motor. Check voltage between transfer control unit harness connector terminals and ground. Harness for short or open between battery and transfer shut off relay 2 harness connector E157 terminal 1 and 3.
Harness for short or open between ignition switch and transfer control unit harness connector M152 terminal 25. Harness for open between transfer shut off relay 1 harness connector E156 terminal 2 and ground. Check voltage between transfer control unit harness connector terminal and ground.
Manual Cover
General