Manual Description
The vehicle itself can be a source of noise if noise prevention parts or electrical equipment is malfunctioning. This system includes seat belt switch inputs and dual stage front air bag modules. Remove the audio control unit bracket screws and remove the audio control unit brackets.
Pull out the front tweeter speaker (1) and disconnect front tweeter connector, then remove the front tweeter speaker (1). Pull out the front door speaker (1), and disconnect the front door speaker connector and remove the front door speaker (1). Verify relation between the symptom and the condition when the symptom is detected.
If a phone is present in thevehicle and paired with the Bluetooth control unit, the indicator will remain on to indicate that the system isready for voice commands. Front door speaker Receives telephone voice and voice guidance signals from the audio amp. The first diagnostic check is performed automatically B every ignition cycle during control unit initialization.
Manual Cover
General