Manual Description
Put a mark on base line of the tread (rear side) of both front tires C at the same height as hub center as shown. Place front wheels on turning radius gauges in straight ahead position and rear wheels on stands so that vehicle can be level. Start engine and run at idle, turn steering wheel all the way right and left, measure the turning angle.
Remove stabilizer bar connecting rod lower nut using power tool, then separate connecting rod from lower link. Remove pinch bolt from steering knuckle using power tool, then separate lower link ball joint from steering knuckle. In order to adjust camber and caster on these vehicles, first replace the lower link bolts and washers with adjustable (cam) bolts and washers.
Put alignment marks on disc rotor and wheel hub and bearing assembly, then remove disc rotor. Remove steering outer socket cotter pin at steering knuckle, then loosen mounting nut using power tool. Set the shock absorber in a vise, then loosen (without removing) C the piston rod lock nut as shown.
Manual Cover
General