Manual Description
Apply the liquid gasket without breaks to the specified location F with the specified dimensions. Also apply to the outside edge of the bolt holes when I specified in the procedure. If the engine is already running, turn it off and allow 10 minutes before checking.
If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible. Install a new copper sealing washer on the oil drain plug, then install the oil drain plug in the oil pan. Warm up the engine and check the area around the drain plug and oil filter for oil leaks.
Screw on the oil filter manually until it touches the installation surface, then tighten it by 2/3 turn as shown. If replacement of the relief valve is necessary, remove the relief valve by prying it out using suitable tool. Check oil cooler for clogging by blowing compressed air through engine coolant inlet.
Manual Cover
General