NOTE: CR2354 batteries can be purchased from any
retailer that sells batteries.
4.
Holding the bottom cover at an angle, align the tabs
on the cover with the corresponding slots on the key
fob, then press the cover firmly onto the key fob until
it snaps into place.
5.
Test that the key fob works by unlocking and locking
Model X.
WARNING:
Key fob batteries contain a chemical
burn hazard and should not be ingested. The key
fob contains a coin cell battery. If the coin cell
battery is swallowed, it can cause severe internal
burns within two hours and can lead to death.
Keep new and used batteries away from children. If
the battery compartment does not close securely,
stop using the product and keep it away from
children. If you think batteries might have been
swallowed or placed inside any part of the body,
seek immediate medical attention.
Attaching a Lanyard
To attach a lanyard, release the bottom cover as
described above. Place the lanyard over the pin located
between the slots on the widest side of the key fob. Re-
align the cover and snap into place.
Managing Keys
To display a list of all keys (phone keys, key cards, and
key fobs) that can access your Model X, touch Controls
> Locks. An icon displays next to each key to indicate
whether the key is a phone key, key card, or key fob. Use
this list to manage keys that have access to your
Model X. To add or delete keys, see Adding and
Removing Keys on page 17.
Model X
supports up to 19 keys. When you reach this
limit, you must delete a key before adding a new one.
NOTE: You can use the same key for more than one
Model X. This prevents you from having to deal with
multiple keys when you switch vehicles. If you customize
the name of an authenticated key card or key fob on one
Model X (by touching the pencil icon), any other
Model X to which the key card or key fob is
authenticated also displays the changed name.
Adding and Removing Keys
To add a new key card or key fob:
NOTE: When adding a key fob, ensure it is at room
temperature. Pairing a key fob that is very cold can be
unsuccessful.
1. On the touchscreen, touch Controls > Locks > Keys >
Add Key.
2. Scan your new key card or key fob on the card reader
located on the wireless phone charger. To scan the
key fob:
◦
Place it at the top of the left phone charger,
against the center divider.
◦
Point the front of the key fob to the left.
◦
Swipe downwards (as shown in the image).
When you hear a chime and the new key is
recognized, remove it from the card reader.
3.
Scan a key card or key fob that has already been
paired to the vehicle to confirm new key pairing.
4. When complete, the key list includes the new key.
Touch the associated pencil icon to customize the
name of the key.
Removing a key:
When you no longer want a key to access Model X (for
example, you lost your phone or key card, etc.), follow
these steps to remove it.
Keys
17Opening and Closing
