To replace the wiper blades:
1. Shift into Park and turn o the wipers.
2. Touch Controls > Service > Wiper Service Mode to
move the wipers to the service position.
3. Lift the wiper arm a short distance away from the
windshield, just far enough to access the wiper blade.
CAUTION: Wiper blades do not lock into a lifted
position. Do not lift a wiper arm beyond its
intended position.
4.
Gently slide the wiper blade out and up to release it
from the wiper arm.
5.
Place a towel between the wiper arm and windshield
to avoid scratching or cracking the windshield.
6.
Hold the wiper arm and press the locking tab while
sliding the blade down the arm.
7.
Slide the wiper blade down and into the wiper arm to
secure it in place.
8.
Align the new wiper blade on the wiper arm and slide
it toward the end of the wiper arm until it locks into
place.
9.
Turn Wiper Service Mode o to return the wipers to
their normal position.
Cleaning Washer Jets
If a windshield washer becomes blocked, use a thin
strand of wire to clear any blockages from the nozzles.
WARNING:
Do not operate the washers while
cleaning Model X. Windshield washer fluid can
irritate eyes and skin. Read and observe the
washer fluid manufacturer’s instructions.
Windshield Wiper Blades, Jets and Fluid
201Maintenance
