Manual Description
When the ignition is switched on, the heat applied to the washer nozzles is automatically regulated depending on the outside air temperature. If the ignition and the headlights (high or low beams) are switched on, the headlights are cleaned the first time and every fifth time the front windshield washers are activated. This happens only when the low or high beams are on when the windshield wiper lever is pulled towards the steering wheel.
However, the headlights must still be washed by hand periodically (for instance, during refueling) in order to get rid of hard-to-remove dirt (like insect splatter). To help make sure that the headlight cleaning system works during winter weather, always keep the headlight washer nozzles free of snow and remove any ice with a deicer spray before driving. Carefully fold the wiper arms back onto the windshield before driving! Switch the ignition on and press the windshield wiper lever down briefly ⇒ fig.
Lifting the wiper blades and tilting them away from the windshield Put the wiper arms in service position ⇒ . Mixing ratio 1:100 (1 part concentrate to 100 parts water) in the windshield washer reservoir. This could produce an oily film on the windshield, which would considerably reduce visibility.
Manual Cover
General