Manual Description
Periodic maintenance and adjustment. Final transmission oil The final transmission case must be checked for oil leakage before each ride. If any leakage is found, have a Yamaha dealer check and repair the vehicle. In addition, the final transmission oil must be changed as follows at the intervals specified in the periodic maintenance and lubrication chart.
1. Start the engine, warm up the final transmission oil by riding the vehicle for several minutes, and then stop the engine. 2. Place the vehicle on the centerstand. 3. Place an oil pan under the final transmission case to collect the used oil. 4. Remove the final transmission oil filler cap and its O-ring from the final transmission case.
5. Remove the final transmission oil drain bolt and its gasket to drain the oil from the final transmission case. 6. Install the final transmission oil drain bolt and its new gasket, and then tighten the bolt to the specified torque. 7. Refill with the specified amount of the recommended final transmission oil.
Manual Cover
General