Online Viewer
Manual Description
Be sure the side of the handlebar lower holder having the greater distance "a" from the mounting bolt center faces forward. And install it in the hole "b" in the rear of the upper bracket. Apply the lithium soap base grease on the thread of the handlebar lower holder. Change in the direction back to front and installing position of the handlebar lower holder allows the front-to-rear offset amount of the handlebar position to be changed.
Do not tighten the nut yet The handlebar upper holder should be installed with the punched mark "a" forward. Install the handlebar so that the marks "b" are in place on both sides. Install the handlebar so that the projection "c" of the handlebar upper holder is positioned at the mark on the handlebar as shown. First tighten the bolts on the front side of the handlebar upper holder, and then tighten the bolts on the rear side.
Manual Cover
General