Manual Description
Make sure that the louvers located at the tip of the exhaust are clear of any obstructions as they are used to introduce fresh air into the tailpipe to cool the exhaust gases as they leave the exhaust system. Answer yes to this prompt and then follow the next prompts regarding exhaust position required to initiate operator commanded regeneration. The display confirms the operation has started and when it has finished.
The diesel particulate filter load percentage fluctuates up and down when driving your vehicle due to active and passive regenerations. You will hear a change in audible sound due to engine speed and cooling fan speed increases. Answer yes to this prompt and then follow the next prompts regarding the exhaust position required to initiate operator commanded regeneration.
The exhaust system remains very hot for several minutes even after regeneration is complete. Do not reposition the vehicle over materials that could burn until the exhaust system has had sufficient time to cool. Actual mileage varies depending on engine and vehicle operating conditions.
Manual Cover
General
