Online Viewer
Manual Description
Enabling/Disabling EITMS. Enabled: The EITMS engine cooling feature automatically activates whenever the vehicle comes to a complete stop and is idling during elevated temperature conditions. When the feature is enabled, it may not activate under cool riding conditions. Disabled: The EITMS feature is not active under any conditions.
EITMS can be enabled or disabled by performing the following procedure. 1. Turn the ignition switch on. Push the engine off/run switch on the right handlebar to the run position (the motorcycle may be running or not running). 2. Push the throttle to rolloff position and hold.
3. See Instrument Lamps. After approximately 3 seconds, the cruise indicator lamp will either flash green (EITMS enabled) or orange (EITMS disabled). 4. Repeat the procedure as necessary to enable or disable EITMS. Stopping the Engine. 1. Stop the engine by turning the engine off/run switch on the right handlebar to off.
2. Turn the ignition switch to off. If the engine should be stalled or stopped in any way, turn the ignition switch to OFF at once to prevent battery discharge.
Manual Cover
General
