Online Viewer
Manual Description
Oil Level Hot Check. 1. Run engine until engine oil is at normal operating temperature. Turn engine off. 2. Position motorcycle so that it is leaning on jiffy stand on level ground. 3. Remove filler cap. Wipe attached dipstick clean. Reinstall oil filler cap in tank.
4. Remove filler cap again and check warm oil level on dipstick. 5. Place filler cap/dipstick back into oil tank. 6. If you added oil in step 4, remove filler cap and verify correct engine oil level in oil tank. Do not fill oil tank to the level above upper mark on dipstick.
Replace filler cap.
Manual Cover
General
