Online Viewer
Manual Description
Refer to Regular Service Intervals: 2015 Dyna Models. Remove air cleaner cover and inspect filter element at proper intervals. When operated under dusty conditions, inspect more often. Wash the paper/wire mesh filter element in lukewarm water with a mild detergent.
Do not strike filter element on a hard surface to dislodge dirt. Allow filter element to either air dry or blow it dry, from the inside, with low pressure air. Do NOT use air cleaner filter oil on the HarleyDavidson paper/wire mesh air filter element. Hold the filter element up to a strong light source.
The element is sufficiently clean if light is uniformly visible through the media. Replace the filter element if damaged or if filter media cannot be adequately cleaned. Install baseplate gasket, air filter element and bracket if removed. Tighten bracket screws.
Refer to Air Cleaner Fastener Torque. Install air cleaner cover. Apply a drop of LOCTITE THREADLOCKER 243 (blue) to the threads of the cover screw and tighten. Refer to Air Cleaner Fastener Torque.
Manual Cover
General
