Manual Description
Remove your watercraft from the water and move it away from the shoreline before refueling. Catch the draining water in the drain pan or soak it up with the dry cloth so that it does not spill into the engine compartment. Water sucked in through the intake grate is pressurized by the impeller in the jet pump.
The watercraft will go sharply if you apply throttle while turning the straight even though the handlebars are handlebars. Do not go near others to their feet on the floor of the footwell and spray or splash them with water. Avoid sharp turns or other maneuvers that make it hard for others to avoid you or understand where you are going.
Insert the garden hose conditions that can shorten the life of many adapter into the flushing hose connector watercraft components. Use a suitable marine grease applicator and spray a rust inhibitor between the inner and outer cables to lubricate the cables and purge out any dirt and moisture. Perform the pre-operation checks and post-operation checks before performing periodic maintenance.
Manual Cover
General
