3. Remove the adapter after unscrewing the lug
bolt.
Screwing on
1. Attach the adapter to the lug lock bolt. If nec‐
essary, turn the adapter until it fits on the lug
lock bolt.
2. Screw on the lug lock bolt. The tightening
torque is 140 Nm.
3. Remove the adapter and stow it after screw‐
ing on the lug bolt.
Preparing the vehicle
▷ Park the vehicle on solid and non-slip ground
at a safe distance from traffic.
▷ Switch on the hazard warning system.
▷ Set the parking brake.
▷ Engage a gear or move the selector lever to
position P.
▷ As soon as permitted by the traffic flow, have
all vehicle occupants get out of the vehicle
and ensure that they remain outside the im‐
mediate area in a safe place, such as behind a
guardrail.
▷ Depending on the vehicle equipment, get
wheel change tools and, if necessary, the
emergency wheel from the vehicle.
▷ If necessary, set up a warning triangle or port‐
able hazard warning light at an appropriate
distance.
▷ Secure the vehicle additionally against rolling.
▷ Loosen the lug bolts a half turn.
▷ Deactivate the air suspension level adjust‐
ment.
Two-axle ride level control, refer to page 282.
Jacking points for the vehicle
jack
The jacking points for the vehicle jack are lo‐
cated at the indicated positions.
Seite 379
Wheels and tires
MOBILITY
379
Online Edition for Part no. 01405A10FB7 - VI/20
