▷ Do not exceed a towing distance of
3 miles/5 km.
▷ When starting to tow the vehicle, make sure
that the tow rope is taut.
Tow fitting
General information
The screw-in tow fitting should always be carried
in the vehicle.
The tow fitting can be screwed in at the front or
rear of the vehicle.
The tow fitting is located beneath the cargo floor
panel.
▷ Use only the tow fitting provided with the ve‐
hicle and screw it all the way in.
▷ Use the tow fitting for towing on paved roads
only.
▷ Avoid lateral loading of the tow fitting, for in‐
stance do not lift the vehicle by the tow fit‐
ting.
▷ Check the fastening of the tow fitting in regu‐
lar intervals.
Additional information:
Onboard vehicle tool kit, refer to page 395.
Safety information
NOTICE
If the tow fitting is not used as intended, there
may be damage to the vehicle or to the tow fit‐
ting. There is a risk of damage to property. Fol‐
low the notes on using the tow fitting.
Screw thread for tow fitting
Press on the mark on the edge of the cover to
push it out.
Tow-starting
Do not tow-start the vehicle.
Start the engine by jump-starting, if possible.
Have the reasons for the starting difficulties cor‐
rected by a dealer’s service center or another
qualified service center or repair shop.
Additional information:
Jump-starting, refer to page 403.
Seite 406
MOBILITY
Breakdown assistance
406
Online Edition for Part no. 01405A10FB7 - VI/20
