2013 Harley-Davidson Road King Owner's Manual (Page 103 of 179) 

2013 Harley-Davidson Road King Owner's Manual
Posted on 15 Mar, 2016
Model: 2013 Harley-Davidson Road King
Pages: 179
File size: 4 MB

Get Manual

Online Viewer
This motorcycle was originally equipped with GENUINE HARLEY DAVIDSON H D 360
MOTORCYCLE OIL 20W50. H D 360 is the preferred oil under normal operating conditions. If
operation under extreme cold or heat are expected, refer to Recommended Engine Oils for
alternative choices.
If necessary and H D 360 is not available, add oil certified for diesel engines. Acceptable
designations include: CH 4, CI 4 and CJ 4. The preferred viscosities, in descending order are:
20W50, 15W40 and 10W40.
At the first opportunity, see an authorized dealer to change back to 100 percent Harley Davidson
oil.
Recommended Engine Oils
TYPE VISCOSITY RATING LOWEST
AMBIENT
TEMPERATURE
COLD
WEATHER
STARTS
BELOW
50 °F (10 °C)
Screamin' Eagle SYN 3 Full Synthetic
Motorcycle Lubricant
SAE
20W50
HD 360 Above 30 °F 1
°C
Excellent
Genuine Harley Davidson H D 360
Motorcycle Oil
SAE
20W50
HD 360 Above 40 °F 4
°C
Good
Genuine Harley Davidson H D 360
Motorcycle Oil
SAE 50 HD 360 Above 60 °F 16
°C
Poor
Genuine Harley Davidson H D 360
Motorcycle Oil
SAE 60 HD 360 Above 80 °F 27
°C
Poor
Genuine Harley Davidson H D 360
Motorcycle Oil
SAE
10W40
HD 360 Below 40 °F 4
°C
Excellent
Engine Oil Level
Prolonged or repeated contact with used motor oil may be
harmful to skin and could cause skin cancer. Promptly
wash affected areas with soap and water. (00358b)
Do not overfill oil. Doing so can result in oil carryover to
the air cleaner leading to equipment damage and/or
equipment malfunction. (00190b)
NOTE:
The oil level marks for checking with motorcycle upright or on jiffy stand are on the same side of
the dipstick. Carefully read dipstick when checking oil level.
Check engine oil level at each complete fuel refill.
Oil Level Cold Check
1. For pre ride inspection, place vehicle on level ground resting on its jiffy stand (unless
sidecar is attached).
2. See Engine Oil Filler Cap. Remove filler plug/dipstick and wipe off the dipstick. Insert the
dipstick and tighten into the fill spout.