Lens Cap Notch
Turn Signal Bulb Replacement: Flat Lens Style
1. See Turn Signal Lamp Assembly: Flat Lens Style. Remove two screws to release lens
from lamp housing.
2. Push bulb in and rotate counterclockwise to remove bulb from socket.
3. Inspect condition of electrical contacts in socket. If necessary, clean with a small wire brush
and electrical contact cleaner.
4. Apply ELECTRICAL CONTACT LUBRICANT to contacts in socket and at bottom of new
bulb.
5. Align index pins on new bulb with pin guides in bulb socket. Push bulb in and turn clockwise
to lock in place.
6. Seat lens in lamp and install two screws.
Be sure that all lights and switches operate properly
before operating motorcycle. Low visibility of rider can
result in death or serious injury. (00316a)
7. Test lamp operation.
