Recommended Surface Care Products
PRODUCT PART
NO.
DESCRIPTION
Wash Mitt 94760 99 Absorbent wool blended washing mitten.
Soft Detailing Pad 94790 01 Soft pad for removing bugs and debris without scratching
the surface finish.
Softstrips 94680 99 For cylindrical surfaces such as handlebars, forks, pushrod
covers and spokes.
Softcloth 94656 98 Non absorbent cloth for applying and buffing Swirl & Scratch
treatment and Harley Glaze to painted surfaces or chrome.
Soft Drying Towel 94791 01 Extra absorbent, non streaking synthetic towel for drying.
Dampen towel and wring out before using for greatest
absorbency.
Harley Davidson Hog
Blaster Motorcycle
Dryer
94651 09 Blows a stream of warm dry filtered air. Reduces streaks
and water spots.
Wheel & Spoke Brush 43078 99 Cone shaped scrub brush for wheels.
Microfiber Detailing
Cloth
94663 02 Highly absorbent detailing cloth for polishing and sealing.
Contains no nylon fibers.
Detailing Swabs 93600107 Large cotton swabs for cleaning crevices and detailed
surfaces.
Cleaning Brush Kit 94844 10 Brush kit for detailing your motorcycle.
H D Bike Wash Bucket
and Apron
94811 10 Wash bucket with apron to hold your supplies. Includes grit
guard.
Washing the Motorcycle
Use only recommended cleaning and care products. Refer to Recommended Cleaning and
Care Products and Recommended Surface Care Products.
NOTE:
During rinsing and washing, avoid direct spray on radio, speakers, saddlebags, trunk or Tour Pak
sealing areas (if equipped). Avoid spraying water under leather saddlebag covers (if equipped).
Preparation
1. Allow motorcycle to cool before rinsing or washing. Spraying water on hot surfaces can
leave water spots and mineral deposits.
2. Rinse the motorcycle from the bottom up.
3. To loosen dried bugs or hardened dirt, allow surfaces to soak under a damp towel.
Cleaning the Wheels and Tires
1. Rinse wheel and tire surfaces. Avoid splashing brake dust on chrome or painted parts.
2. Apply WHEEL & TIRE CLEANER. Allow cleaner to set for one minute.
3. Clean the wheel with a SOFT DETAILING PAD or WHEEL & SPOKE BRUSH. Use
SOFTSTRIPS to clean wheel spokes. Thoroughly scrub all brake dust and other sediments
off the wheel. Accumulated brake dust can trap moisture and dirt, which leads to wheel
corrosion.
4. Rinse well.
