affected, which could result in loss of control of the
motorcycle and death or serious injury. (00047d)
2. See Oil Pan. Remove transmission drain plug. Drain lubricant into a suitable container.
3. Clean and inspect drain plug and O ring.
Do not over tighten filler or drain plug. Doing so could
result in a lubricant leak. (00200b)
4. Install drain plug with O ring. Tighten to 14 21 ft lbs (19.0 28.5 Nm). Do not over tighten.
5. Fill the transmission with 28 oz 0.83 L of recommended Harley Davidson lubricant. Refer to
Recommended Lubricant.
6. Check lubricant level and add enough lubricant to bring the level between the A(dd) and
F(ull) marks. See Checking Transmission Lubricant.
7. Install filler plug/dipstick. Tighten to 25 75 in lbs (2.8 8.5 Nm).
1. Transmission drain plug (right side)
2. Engine oil drain plug and O ring
3. Hex plug (do not remove)
Oil Pan
Primary Chaincase Lubricant
General
NOTE:
The chaincase lubricant level should be drained and refilled at specified intervals. Refer to
Regular Service Intervals: 2013 Touring Models.
Check Lubricant Level
