1. Top caddy
2. Lifting strap
Move Top Caddy Aside
Installation and Connection
1. Run lifting strap rearward across the bottom of the battery tray, then up and across the
frame crossmember.
2. Place the battery into the battery tray, terminal side forward.
Connect the cables to the correct battery terminals. Failure
to do so could result in damage to the motorcycle
electrical system. (00215a)
Connect positive (+) battery cable first. If positive (+) cable
should contact ground with negative ( ) cable connected,
the resulting sparks can cause a battery explosion, which
could result in death or serious injury. (00068a)
Do not over tighten bolts on battery terminals. Use
recommended torque values. Over tightening battery
terminal bolts could result in damage to battery terminals.
(00216a)
3. Turn the ignition switch to the OFF position.
4. Connect battery cables, positive cable first. Tighten to 60 70 in lbs (6.8 7.9 Nm).
Keep battery clean and lightly coat terminals with
petroleum jelly to prevent corrosion. Failure to do so could
result in damage to battery terminals. (00217a)
