Brake and
clutch
controls
Check and
lubricate
X X X X X X X X X X X 1
Jiffy stand Inspect and
lubricate
X X X X X X X X X X X 1
Fuel lines
and fittings
Inspect for
leaks, contact
or abrasion
X X X X X X X X X X X 1, 3
Fuel filter
element
Replace every 100,000 mi 160,000 km . 1
Brake fluid Inspect sight
glass
X X X X X X X X X X X 4
Brake pads
and discs
Inspect for
wear
X X X X X X X X X X X
Spark plugs Replace X 8
Electrical
equipment
and switches
Check
operation
X X X X X X X X X X X
Front forks Rebuild X 1, 6
Steering
head
bearings
Lubricate X X X X X
Steering
head
bearings
Adjust X X 1, 2
Air
suspension
(if equipped)
Check
pressure,
operation and
leakage
X X X X X X X X X X X 1, 7
Windshield
bushings (if
applicable)
Inspect X X X X X 1
Fuel door,
Tour Pak,
saddlebags
(if equipped)
Lubricate
hinges and
latches
X X X X X X X X X X X
Critical
fasteners
Check
tightness
X X X X X X 1
Battery Check battery and clean connections annually.
Exhaust
system
Inspect for
leaks, cracks,
and loose or
missing
fasteners or
heat shields
X X X X X X X X X X X 3, 7
Road test Verify
component
and system
functions
X X X X X X X X X X X
NOTES: 1. Should be performed by an authorized Harley Davidson dealer, unless you have the proper tools,
service data and are mechanically qualified.
2. Disassemble, lubricate and inspect every 50,000 mi 80,000 km .
3. Perform annually or at specified intervals, whichever comes first.
4. Change DOT 4 brake fluid and flush system every two years.
