the motorcycle is to be moved while parked, have the fob present.
If the motorcycle will not be operated for several months, such as during the winter season, refer
to Motorcycle Storage.
Service Departments
When the motorcycle is to be left at a Harley Davidson dealer, there are two options:
1. Leave an assigned fob with the dealer.
2. To maintain possession of the fob, ask the dealer to disable the system for service (service
mode) before leaving the dealership.
Sidecar Configuration
Only Touring Harley Davidson Motorcycles are suitable for
sidecar use. Consult a Harley Davidson dealer. Use of
motorcycles other than Touring models with sidecars
could result in death or serious injury. (00040a)
Before operating your motorcycle with sidecar attached,
have a Harley Davidson dealer install a Bank Angle Switch
kit. The TSM/HFSM will not function properly if not
switched to sidecar operation. (00486c)
On motorcycles with a sidecar, the turn signal module (TSM) or the Hands Free Security Module
(HFSM) must be switched from the factory solo vehicle setting to the sidecar setting. Consult a
Harley Davidson dealer for complete details.
If a sidecar is permanently removed from the motorcycle, the TSM or the HFSM must be
reconfigured. Refer to the SIDECAR SERVICE MANUAL for complete details.
Fob Battery
Replacing the Battery
Replace the fob battery every year.
1. See Fob Battery. Slowly turn a thin blade in the thumbnail slot (1) on the side of the fob to
separate the two halves.
2. Remove the battery (2) and discard.
NOTE:
Dispose of the old battery in accordance with local regulations.
3. Install a new battery (Panasonic 2032 or equivalent) with the positive (+) side down.
4. Align the two halves of the fob and snap together.
