market motorcycles. The auxiliary/fog lamps remain ON with both the low beam and high beam
headlamp for Japan market motorcycles.
See Nacelle Switches: FLHR/FLHRC. On FLHR/FLHRC models, the switch is located on the
right side of the nacelle.
See Switch Indicators. On all other models equipped with auxiliary/fog lamps, the switch is
located on the left side of the ignition switch on the fairing cap.
Fairing Lower Vents
Some models are equipped with fairing lowers. The fairing lowers block wind and water from the
rider legs, and include a compartment for storing small items.
See Fairing Lower Vent Control. Vents in fairing lowers are controlled by the lever shown.
Adjust vent openings to control air flow.
Fairing lowers may be removed in warmer ambient temperature to increase rider and passenger
comfort.
Fairing Lower Vent Control
Passenger Footboards/Footrests
Passenger footboards/footrests can be adjusted to one of three positions. Before moving to a new
position, remove plastic plugs from holes in the footrest mount in the frame as necessary.
1. See Passenger Footboard/Footrest (typical). Remove socket screw with lockwasher
from top of footboard/footrest bracket. Do not remove lower screw from footboards.
2. Place bracket at the desired position. Insert pin (on footrest bracket only) into mount hole.
3. Install socket screw with lockwasher. Apply a drop of Loctite Threadlocker 243 (blue) to the
threads. Tighten socket screw to 36 42 ft lbs (49 56 Nm).
