lower than the measured bulb centerline.
NOTE:
The headlamp is aligned when the light beam hot spot is centered over the intersection of
the lines.
9. Verify headlamp alignment. Adjust as necessary.
1. Perpendicular line
2. Vertical line
3. 25 ft (7.6 m)
4. High beam bulb centerline
5. Horizontal line 2.1 in (53.3 mm) lower than bulb centerline
Check Headlamp Alignment
Headlamp Adjustment: Single Headlamp Models
NOTE:
Do not remove trim ring for headlamp adjustment.
1. See Headlamp Adjusters (typical). Insert screwdriver through adjuster slots in trim ring.
a. Horizontal: Turn the horizontal adjusting screw to adjust light beam left and right.
b. Vertical: Turn the vertical adjusting screw to adjust light beam up and down.
2. Adjust the light beam until it is centered as shown in Check Headlamp Alignment.
