The serial number of the fob is also found on the inside of the fob. See Fob Battery.
The module will arm only if the fob has been assigned by a Harley Davidson dealer and a
Personal Identification Number (PIN) has been entered in the system. The PIN should be
recorded on the Personal Information page in the front of this Owner's Manual and on the
removable wallet card.
Should the rider misplace the fob or if the fob fails, the rider can refer to the wallet card and
use the PIN to manually disarm the system. Refer to Arming and Disarming and
Troubleshooting.
The PIN can easily be changed by the rider at any time. Refer to Personal Identification
Number (PIN).
Riding with a Fob
Always carry the fob when riding, loading, fueling, moving, parking or servicing the
motorcycle. Carry the fob in a convenient pocket.
Do not leave the fob attached to the handlebars or store the fob in a luggage compartment.
Unintentionally leaving the fob with the motorcycle when it is parked prevents the system
from activating the alarm.
Do not ride with the fob stored in a metal case or with the fob closer than 3.0 in 76 mm to a
cell phone, PDA, display or other electronic device. Any electromagnetic interference may
prevent the fob from disarming the system.
For added security, always lock the fork and remove the key when parked. If the fob is
within range and the motorcycle is unlocked, tampering with the motorcycle will not activate
the alarm.
Fob: Smart Security System
Personal Identification Number (PIN)
The Personal Identification Number (PIN) is a number that can be used to disarm the Harley
Davidson Smart Security System in case an assigned fob is misplaced, fails or if the fob cannot
communicate with the motorcycle because of electromagnetic interference.
A PIN is a five digit number (1 9, no zeros).
Changing the PIN
