Headlamp Retaining Screws (typical)
Bulb Replacement
When replacement is required, use only the specified
sealed beam unit or bulb, available from a Harley Davidson
dealer. An improper wattage sealed beam or bulb, can
cause charging system problems. (00209a)
NOTE:
The quartz halogen bulb is very delicate and must be handled with care.
1. Remove headlamp assembly.
2. Remove rubber boot at back of housing.
3. See Wire Retaining Clip. Release wire retaining clip (1) from retainer (2).
NOTE:
Loosen retainer screw 1/2 1 turn to release wire retaining clip if necessary.
Handle bulb carefully and wear eye protection. Bulb
contains gas under pressure, which, if not handled
carefully, could cause serious eye injury. (00062b)
4. Remove and discard bulb.
Never touch the quartz bulb. Fingerprints will etch the
glass and decrease bulb life. Handle the bulb with paper or
a clean, dry cloth. Failure to do so could result in bulb
