When the module disarms, the optional siren will chirp once and the key icon will illuminate for a
solid four seconds and then turn off.
NOTE:
Any motion, like lifting the motorcycle up off of its jiffy stand, or turning the ignition key to
IGNITION and the module will electronically search for the presence of the fob. If the fob is
present, the system disarms.
Personal Identification Number (PIN): If the fob is misplaced or if the present fob fails to
communicate with the module, the system can be disarmed with the Personal Identification
Number (PIN).
Disarming with a PIN
Do not turn handlebars, straddle seat or lift motorcycle off the jiffy stand. During a PIN disarm, if
the security system detects motorcycle motion the system will activate the alarm.
NOTES:
At any time during a PIN disarm, if the fob is brought within range of the motorcycle, the
security system will disarm when the module receives the coded signal from the fob.
If a mistake is made while entering PIN, wait two minutes before another disarming attempt.
The security system will remain disarmed until the ignition key is turned to OFF.
Entering a PIN to Disarm Harley Davidson Smart Security System
STEP
NO.
ACTION WAIT FOR CONFIRMATION NOTES
1 If necessary, verify the current
5 digit PIN.
Should be recorded on
wallet card.
2 Turn ignition switch to
IGNITION.
3 Quickly (within 2 seconds of
turning ignition switch) hold
both turn signal switches in
until confirmation.
Key icon flashes at fast rate. In
the odometer window, a
flashing dash will be followed by
four more dashes.
See Odometer
Windows PIN. Five
dashes will appear in the
odometer window.
4 Enter first digit (a) in the PIN
by pressing left turn switch a
times.
The first digit (a) in the
odometer will be the first digit in
the PIN.
5 Press right turn switch 1 time. The first digit is stored and the
dash will flash.
Serves as enter key.
6 Enter second digit (b) in the
PIN by pressing left turn
switch b times.
The second digit (b) in the
odometer will be the second
digit in the PIN.
7 Press right turn switch 1 time. The second digit is stored and
the next dash will flash.
Serves as enter key.
8 Enter third digit (c) in the PIN
by pressing left turn switch c
times.
The third digit (c) in the
odometer will be the third digit
in the PIN.
9 Press right turn switch 1 time. The third digit is stored and the
next dash will flash.
Serves as enter key.
10 Enter fourth digit (d) in the PIN
by pressing left turn switch d
times.
The fourth digit (d) in the
odometer will be the fourth digit
in the PIN.
11 Press right turn switch 1 time. The fourth digit is stored and
the next dash will flash.
Serves as enter key.
12 Enter fifth digit (e) in the PIN
by pressing left turn switch e
times.
The fifth digit (e) in the
odometer will be the fifth digit in
the PIN.
13 Press right turn switch 1 time. The fifth digit is stored. The key Smart Security System
